Circuits, wood, and a quiet kind of craft.
Each coaster is a real circuit board, 1.6 mm of glass-fibre laminate with a plated gold rim and a printed picture. There is one in solid ash, too.
PCB coasters €69.00, ash wood €45.00
Choose your coaster.
All products
Turn it over.
Front
The picture
Drawn in our studio and printed with UV-cured multicolour silkscreen, straight onto the board.
Edge
The board
1.6 mm of FR4 glass-fibre laminate, 100 mm across, 38 g. The gold rim is the copper layer itself, plated with nickel and immersion gold (ENIG).
Back
The reverse
A pattern in bare ENIG gold and the SA mark. Every PCB coaster has one, so either side can face up.
In the hand.
Every design was filmed on our bench before it went on sale. The board in the clip is the board you receive.
Takes a fresh espresso
FR4 is cured under heat and pressure. It does not warp and it does not stain.
Keeps its colour
The rim is immersion gold over nickel, the finish used on fine-pitch electronics because it does not tarnish.
Designed in Bielawa
Every picture is drawn in our studio in Poland. The boards come from a specialist fabricator in Shenzhen.